IBX5980432E7F390 Mekanika dan Hidrodinamika Ujian Akhir Diklat ATT-II (2) - BLOG PELAUT

Mekanika dan Hidrodinamika Ujian Akhir Diklat ATT-II (2)

Aplikasi Mekanika dan Hidrodimanika di Kapal

Sebelumnya : Mekanika benda tegar, Gaya-gaya Gesek
1. A piston has allowable tensile stress of 50 N/mm² and has bore diameter 150 mm. Considering strength of piston, what will be the thickness of piston head if maximum pressure of 10 N/mm² acts on it?
a. 29 mm ✔️
b. 35 mm
c. 53 mm
d. Insufficient data
e. None of the above

2. Failure rate for safety valve working for 400 hours is 3 x 10 -6 failures/hour. What is the reliability of safety valve?
a. 0.998 ✔️
b. 0.989
c. 0.888
d. 0.899
e. none of the above

3. Which axial force is determined while analyzing a truss?
a. compressive force
b. tensile force
c. both a. and b. ✔️
d. none of the above
e. all of the above

4. An object of 30 kg is moved with a velocity of 2 m/s on a horizontal smooth surface. What is the velocity of the block for 4 seconds if force of 40 N is applied on it in the direction of force?
a. 2 m/s
b. 4.6 m/s
c. 7.33 m/s ✔️
d. 9.33 m/s
e. none of the above

5. If two objects of 30 kg and 10 kg move with equal kinetic energy, then what is the ratio of magnitudes for linear momentum?
a. √3 : 1 ✔️
b. 1 : √3
c. 1 : 3√3
d. 1 : 3
e. All of the above

6.Work done by an engine in 6 sec is 1000 joules. What is the power generated by the engine in watt?
a. 1600 watt
b. 600 watt
c. 166 watt ✔️
d. 600 watt
e. 500 Watt

7.If a particle of mass 5 kg moves uniformly along a circle of radius 10 m at 10 m/s, then what is the work done by centripetal force during its one revolution?
a. 0.5 kNm
b. zero ✔️
c. infinity
d. none of the above
e. all of the above

8. A block is displaced by 3 m when a force of 200 N is applied on it on an inclined surface which is at an angle of 50° with the horizontal. What is the work done?
a. 385.67 Nm ✔️
b. 459.62 Nm
c. 933.00 Nm
d. Insufficient data
e. None of the above

9. What is the momentum of a body of 2 kg at its highest point, when thrown with a velocity of 15 m/s at an angle of of 70° with the horizontal?
a. 9.23 kg ms-¹
b. 10.26 kg ms-¹ ✔️
c. 28.19 kg ms-¹
d. None of the above
e. All of the above

10. What is the minimum velocity attained by a ball thrown with velocity of 20 m/s at an angle of 40o with the horizontal?
a. 15.32 m/s ✔️
b. 12.85 m/s
c. 16.78 m/s
d. None of the above
e. all of the above

11. Pompa air laut dng tinggi hisap 3m dan dipompakan dengan ketinggian 76m. Kapasitas pompa adalah 108 m³/jam, diameter pipa tekan = 130mm, apabila kerugian gesek pada pipa = 13,7m dan hpompa = 65%. Diminta berapa besar daya yang diperlukan untuk menggerakkan pompa, bj air = 1025 kg/m³.
a. 41,18 PK ✔️
b. 41,18 Pa
c. 41,18 kPa
d. 41,18 Mpa
e. saya tidak tau

12. Sebuah mesin kemudi elektrik – hidrolik yang terdiri 4 ram berdiameter 250mm, dan tiang kemudi ( Rudder Stock ) berdiameter 400mm. jarak tengah-tengah silinder ketitik tengah tiang kemudi 800mm. daun kemudi terkena pukulan gelombang laut ketika posisi kemudi di tengah tengah, sehingga tekanan hidraulik minyak yang ditunjukkan manometer sebesar 70 bar.
Tentukan tekanan yang terjadi pada tiang kemudi.
a. 43748,4 kN/m²
b. 43,7484 MN/m²
c. 43748400 N/m²
d. a,b,c benar ✔️
e. a,b,c salah

13. Motor diesel penggerak kapal mempunyai daya indicator 1500 ikw pada saat putaran baling – baling = 120 Rpm. Rendemen Mekanik = 93 % ,rendemen baling - -baling 92 % >Pada putaran penuh menhgasilkan kecepatan kapal 16 Knot. Daya dorong Kapal yang terjadi adalah :
a. 1283,4 iKW
b. 1283,4 W
c. 1,2834 iMW
d. a,c, benar ✔️
e. semuanya salah

14. Poros baja pejal, panjang 2 meter dengan diameter 60 m/m dan berputar dengan 200/menit. Bila S Gmax poros 70 mega Newton/m² Modulus geser = 80 GN/m².Torsi yang dihasilkan adalah :
a. 44,45 N/m.
b. 44,45 Nm ✔️
c. 44,45 Nmm
d. a,b, benar
e. a,b salah

15. Horsepower adalah jumlah tenaga mesin yang bekerja dalam kurun waktu tertentu, sedang torsi adalah ukuran tenaga. 1 Horsepower setara dengan :
a. 0,746 kW
b. 746 W
c. 1,014 PK
d. a,b,c benar ✔️
e. a,b,c salah

16. Secara umum torsi (torque) merupakan gaya yang digunakan untuk menggerakan sesuatu dengan jarak dan arah tertentu. Dari penjelasan tersebut , maka rumusan untuk torsi dapat diturunkan menjadi dalam satuan SI adalah :
a. Gaya penggerak, Newton (N)x l = jarak, meter (m) ✔️
b. Gaya penggerak, Newton (N)x l = jarak, meter (mm)
c. Gaya penggerak, Newton (N)x l = jarak, meter (cm)
d. a,b,c benar e. a,b,c salah

17. Tegangan (stress) didefinisikan sebagai perbandingan antara gaya yang bekerja pada benda dengan luas penampang benda. Secara matematis dituliskan
satuannya dalam satuan SI adalah :
a. Pascal
b. kilo Pascal
c. N/m²
d. a,c, benar ✔️
e. a,c benar

18. Gaya-gaya aksi dan reaksi antara benda-benda yang berinteraksi memiliki besar yang sama, berlawanan arah, dan segaris disebut hukum :
a. Hk.Pertama Newton
b. Hk.Kedua Newton ✔️
c. Hk.Ketiga Newton
d. Hk.Garis gaya e. Hk. Momentum

19. Besaran yang memiliki besar dan arah disebut :
a. Vektor ✔️
b. Skalar
c. Skala
d. a,b benar
e. a,b salah

20. Diketahui air mengalir pada suatu pipa dengan diameter 50 cm dan pipa berubah beraturan sehingga pada ujung yang lain diameternya 100 cm. Ditanyakan berapakah kecepatan diujung 2 atau v2
a. v = 0,25 m/s ✔️
b. v = 0,25 m/s²
c. v = 0,25 m/s³
d. a,b benar
e. a,b salah

Berlangganan Untuk Mendapatkan Artikel Terbaru:

0 Komentar Untuk "Mekanika dan Hidrodinamika Ujian Akhir Diklat ATT-II (2)"

Posting Komentar